Overview
The QSMP-SV35 is the entry-level Ka-Ro evaluation kit, built around the QSMP-1351 module (STM32MP135C). Single Cortex-A7 at 650 MHz, 256 MB DDR3L and a fan-less industrial design — pre-soldered to the QSBASE1 baseboard for zero-setup Linux development on cost-sensitive IoT, motor-control and small-HMI applications.
What's in the Box
QSBASE1 Baseboard
Compact USB-serial debug platform for the QS family. Brings out the module peripherals over standard headers.
QSMP-1351 Module
Pre-soldered in place — power up over USB and you are immediately on a Linux console. STM32MP135C ready out of the box.
USB Cables
USB-A → USB-C power cable and USB-serial console adapter included.
Software & Support
Pre-flashed Yocto-Linux BSP, full schematics, design package, ikoniq engineering support and a 12-month warranty.
QSMP-1351 Module at a Glance
| Specification | QSMP-1351 |
|---|---|
| SoC | ST STM32MP135C |
| CPU | 1× Cortex-A7 @ 650 MHz |
| RAM | 256 MB DDR3L |
| Storage | 4 GB eMMC |
| Display | RGB |
| Connectivity | 2× CAN-FD, 2× Ethernet RGMII |
| Form Factor | 27 × 27 × 2.6 mm QFN-style solder-down |
| Temperature | -25°C to +85°C (Industrial) |
QSBASE1 Baseboard Features
Why this Kit?
Pre-Soldered, Pre-Flashed
No socket assembly required. Connect USB, hit power, and you are at a Yocto-Linux console — first-boot in under a minute.
Cost-Optimised
STM32MP135C is the most cost-effective Linux SoC in the QS family — ideal for high-volume IoT designs where every euro matters.
Production Migration
Evaluate on this kit, then ship the same code base on the solder-down QSMP-13 production module. No carrier-board re-spin, no software port.
Made in Germany
Designed and manufactured by Ka-Ro Electronics. 12-month warranty and 10+ year availability commitment.
Software & Support
Yocto-Linux BSP
Reference image based on Yocto kirkstone / scarthgap. Boots straight to a Linux console out of the box.
Mainline U-Boot + Linux Kernel
Long-term-supported sources, including Ka-Ro device-tree overlays and module-specific patches.
Schematics & Design Package
Full carrier-board schematics, gerbers and BOM available on request to support your own carrier design.
Documentation
Datasheets for the QSMP-1351 module and the QSBASE1 baseboard.
